low temperature constant temperature bath | constant temperature bath | ultrasonic cell crusher | ultrasonic cell crusher | sterile homogenizer | intelligent homogenizer jiangsu tianling instrument co., ltd-k8凯发天生赢家

   jiangsu tianling ultrasonic cell crusher is a multi-functional and multi-purpose instrument that uses ultrasound to produce cavitation effect in liquid; it is used for breaking various animal and plant cells, virus cells, bacteria and tissues. at the same time, it can be used for emulsification, separation, homogenization, extraction, defoaming, cleaning and accelerating chemical reactions. the machine has been widely used in teaching, scientific research and production in biochemistry, microbiology, pharmacology, physics, zoology, agronomy, medicine, pharmacy and other fields. the machine has excellent design, beautiful appearance, simple operation, stable operation and reliable performance. it adopts single-chip microcomputer control technology and phase-locked loop frequency automatic tracking, and has the functions of automatic adjustment of ultrasonic transmission power overload, over temperature protection and alarm.

   precautions for tianling ultrasonic cell crusher during use:

   1. ultrasonic parameter setting: set the working parameters of the instrument. for samples with sensitive temperature requirements (such as bacteria), generally use ice bath outside. the actual temperature must be lower than 25 ℃, and protein nucleic acid will not denature.

   (1) time: the ultrasonic time shall not exceed 5 seconds each time, and the gap time shall be greater than or equal to the ultrasonic time, so as to facilitate heat dissipation. the time setting should be based on the principle of short ultrasonic time and more ultrasonic times, which can prolong the service life of the ultrasonic machine and probe.

   (2) ultrasonic power: it should not be too large to avoid sample splashing or foam. if it is less than 10ml sample capacity, the power should be within 200w. select 2mm ultrasonic probe, and turn the selector switch of the horn behind the panel to the corresponding gear; the power of 10-200ml sample capacity is 200-400w, 6mm ultrasonic probe is selected, and the horn behind the panel is turned to the corresponding gear; for samples with a capacity of more than 200ml and a power of 300-600w, select a 10mm ultrasonic probe, and turn the horn behind the panel to the corresponding gear; (the power of 2mm small probe shall not exceed 350w).

   (3) container selection: select the beaker with the number of samples, which is also conducive to the convection of samples in ultrasound and improve the crushing efficiency. for example; 20ml beaker is used for 20ml processing capacity. for example, 100ml e. coli sample setting parameters: ultrasound for 5 seconds / interval for 5 seconds, 70 times (total time is 10 minutes). the power is 300w (for reference only), the quantity is about 500ml, and the power is about 500w-800w

   (4) if the sample is placed in a 1.5ml ep tube, please be sure to fix the ep tube well to prevent the liquid level from falling after the ice bath melts, resulting in no-load. 5. daily maintenance: scrub the probe with alcohol or ultrasonic with water after use

   2. no no-load operation is allowed (the operation can be started only after the ultrasonic horn is inserted into the sample).

   3. the depth of the horn (ultrasonic probe) into the water: about 1.5cm, the height of the liquid level is more than 30mm, the probe should be centered, not attached to the wall. ultrasonic wave is a vertical longitudinal wave, which is too deep to form convection and affect the crushing efficiency.